Loading...

cutting edge

Reducing your cost,
Cycle time, space required
FC-SF22/SP22
FC-SF22/SP22

FC-SF22/SP22


Single spindle, two turrets, Twin CNC System
Two turrets can operate simultaneously and carry out different cutting process on both ends.




  • Single spindle, two turrets, Twin CNC System
    Two turrets can operate simultaneously and carry out different cutting process on both ends.
  • Shaft, rod or tubes both ends cutting (O.D.&I.D.) are carried out simultaneously to obtain very high concentricity and benefit.
  • Special auto loading & Unloading system can be fitted to handle workpiece with unsymmetrical or special-shaped on ends.
  • Special spindle can be ordered for special job requirements.


 
型號 Model UNIT FC-SF22/SP22
主軸 SPINDLE   25/42/65/80
主軸數 No. of spindle unit 1
最高轉速 Max.speed rpm 5000/4000/3000/3000
進給速度 Feedrate    
X,Y(Z) 軸快速移動 X/Z axis rapid traverse M/min 16
行程 Stroke    
X1 軸行程 X1 axis stroke mm 100
X2 軸行程 X2 axis stroke mm 100
Z1 軸行程 Z1 axis stroke mm 220
Z2 軸行程 Z2 axis stroke mm 220
Y1 軸行程 Y1 axis stroke mm -
Y2 軸行程 Y2 axis stroke mm -
刀塔 Turret    
刀塔數 No. of turret unit 2
刀塔型式 Turret type servo V8-st
外徑刀具 O.D. tool shank ⧠ mm 20 x 20
內徑刀具 I.D. tool shank(Max.) ∅ mm 25
馬達 Motors    
主軸馬達 Spindle motor KW 7.5
X 軸馬達 Servo motor, X axis KW 1 X 2
Z 軸馬達 Servo motor, Z axis KW 1 X 2
油壓幫浦 Hydraulic pump HP 2
潤滑油幫浦 Lubrication pump W 12
切削液馬達 Coolant pump KW 0.75
機械尺寸 Machine size    
長度 Length mm 2700
寬度 Width mm 2150
高度 Height mm 1900
淨重 Net weight kgs 4200
毛重 Gross weight kgs 5000
Specifications are subject to change without further notice.
Standard
  • Full guard
  • Coolant system
  • Air conditioner
  • Operator panel
  • Tools for set up
  • Pneumatic/Hyd. System 
  • Tower light
  • Work light
  • Chip conveyor
Optional
  • Auto load/unload system
  • Chuck
  • Extension chuck sleeve
  • Power turret
  • Collet
  • Oil mist collector
  • FANUC / PC BASED
  • Hydraulic tailstock
  • Servo tailstock