Loading...

cutting edge

Reducing your cost,
Cycle time, space required
FC-DF11/DP11
FC-DF11/DP11

FC-DF11/DP11


Allow one operator to operate two CNC lathe at the same time. Multiple effect will take place if more DP-11 are in production line. Saving production area.


  • Single spindle with two chunks, able to clamp two different diameters work piece.
  • Tooling two different detail at the same time.
  • Allow one operator to operate two CNC lathe at the same time. Mulitiple effect will take place if more DP-11 are in production line. Saving production area. 
 
型號 Model UNIT FC-DF11/DP11
主軸 SPINDLE   42S
主軸數 No. of spindle unit 1
最高轉速 Max.speed rpm 4000
進給速度 Feedrate    
X,Y(Z) 軸快速移動 X/Z axis rapid traverse M/min 16
行程 Stroke    
X1 軸行程 X1 axis stroke mm 160
X2 軸行程 X2 axis stroke mm 160
Z1 軸行程 Z1 axis stroke mm 220
Z2 軸行程 Z2 axis stroke mm 220
Y1 軸行程 Y1 axis stroke mm -
Y2 軸行程 Y2 axis stroke mm -
刀塔 Turret    
刀塔數 No. of turret unit 2
刀塔型式 Turret type servo V8-st
外徑刀具 O.D. tool shank ⧠ mm 20 x 20
內徑刀具 I.D. tool shank(Max.) ∅ mm 25
馬達 Motors    
主軸馬達 Spindle motor KW 7.5
X 軸馬達 Servo motor, X axis KW 1.5
Z 軸馬達 Servo motor, Z axis KW 1.5
油壓幫浦 Hydraulic pump HP 2
潤滑油幫浦 Lubrication pump W 12
切削液馬達 Coolant pump KW 0.75
機械手臂馬達X/Y/Z/C軸 X/Y/Z/C-axis Robot Motor(Opt) KW 0.4/0.4/0.75/0.75
機械尺寸 Machine size    
長度 Length mm 3920
寬度 Width mm 2150
高度 Height mm 1900
淨重 Net weight kgs 4500
毛重 Gross weight kgs 5000
Specifications are subject to change without further notice.
Standard
  • Full guard
  • Coolant system
  • Air conditioner
  • Operator panel
  • Tools for set up
  • Pneumatic/Hyd. System 
  • Tower light
  • Work light
  • Chip conveyor
Optional
  • Auto load/unload system
  • Chuck
  • Extension chuck sleeve
  • Collet
  • Oil mist collector
  • FANUC / PC BASED
  • Hydraulic tailstock
  • Servo tailstock